Professional Audio Processor DBX DriveRack 260
There is a reason that Tour Sound Professionals and discriminating Audio Contractors choose dbx DriveRack products for their high-end tours and installs. The DriveRack products provide the tools that ensure that the system sounds its very best. With the introduction of the new 260, the heritage of unrivaled system/loudspeaker control continues.
The 260 capitalizes on the road tested and contractor approved nature of the other products in the DriveRack line. The 260 provides full bandpass and crossover configurations as well as independent output processing and a full time RTA for live sound applications. Contractors will appreciate its control inputs for wall-panel logic control and the patent-pending Advanced Feedback Suppression .
Features
- Feedback Elimination
- 2.7 Seconds of Alignment and Zone Delay
- RS-232 PC GUI control
- Classic dbx Compression and Limiting
- Graphic and Parametric EQ
- Auto-EQ Function
- Full Bandpass, Crossover, and Routing Configurations
- Auto Gain Control
- Pink Noise Generator and fulltime RTA
- Setup Wizard with JBL speaker and Crown Power Amplifier Tunings
- Security Lockout
- Wall Panel Control Inputs
- IEC, UL, and CSA Approvals
| Specifications |
| Analog Inputs |
| Number of Inputs |
(2) Line inputs, (1) RTA Mic input |
| Input Connectors |
Female XLR (Line), XLR RTA (Mic) |
| Input Type |
Electronically balanced, RF filtered |
| Input Impedance |
>40 kΩ |
| Max. Input Level |
+34 dBu with input jumpers in +30 position |
| Input CMRR |
>45 dB |
| Mic EIN |
<-110 dBu, 22Hz-22kHz, 150 Ω |
| Phantom Power |
15 VDC |
| Analog Outputs |
| Number of Outputs |
6 Total |
| Output Connectors |
Male XLR |
| Output Type |
Electronically balanced, RF filtered |
| Output Impedance |
120 Ω |
| Max. Output Level |
+22 dBu |
| A/D Performance |
| Type |
dBx Type IV conversion system |
| Dynamic Range Line (unweighted/weighted) |
>114 dB / >112 dB |
| Type IV Dynamic Range (unweighted/weighted) |
>119 dB / >117 dB |
| Sample Rate |
48 kHz |
| D/A Performance |
| Dynamic Range (unweighted/weighted) |
112 dB / 110 dB |
| System Performance |
| Dynamic Range (unweighted/weighted) |
>110 dB / >107 dB |
| THD+Noise @ 1 kHz |
0.002% typ. @ +4 dBu, 0 dB input gain |
| Frequency Response (±0.5dB) |
20 Hz–20 kHz |
| Interchannel Crosstalk |
>110 dB, 120 dB typical |
| Crosstalk input to output |
>100 dB |
| Propagation Delay |
0.6 msec |
| Operating Voltage |
100-240 VAC, 50/60 Hz |
| Power Requirements |
25 Watts |
| Physical |
| Weight |
2.5 kg (5.5 lbs) |
| Dimensions (HxWxD) |
4.45 x 48.3 x 14.6 cm (1.75" x 19" x 5.75") |
| Safety Certifications |
UL 6500, IEC 60065, E 60065, EN 55013 |
